crepbot

batool juma; marwa bani fadel

crepbot

dc.contributor.author	batool juma
dc.contributor.author	marwa bani fadel
dc.date.accessioned	2025-09-08T09:24:44Z
dc.date.available	2025-09-08T09:24:44Z
dc.date.issued	2025
dc.description.abstract	This project presents a fully automated crepe maker that operates without human in tervention, except for choosing the initial settings. The user selects the type of chocolate (white or milk chocolate) and the preferred f illing (small candies or chocolate chips) using a keypad and an LCD panel or using a phone application, after which the machine operates autonomously. All mechanical components are driven by motors controlled via Arduino, running a pre-programmed code. The process begins by loading a precise amount of crepe mixture, usually by a servo motor, and combining it with an appropriate amount of milk. The mixture is then mixed by an automatic mixer and poured onto a circular metal plate that will rotate by a stepper motor and there is gas to heat it, which will be connected to a relay to disconnect and connect the electricity at the appropriate time. Ametal piece, usually powered by a DC motor, is rotated to distribute the mixture evenly and define its edges. Once the crepe is fully cooked, the metal plate moves to the second stage, where the selected chocolate is distributed. Aservo motor and DC motor will be used for this stage, followed by the selected f illing. Finally, the board moves to the third stage with the stepper motor installed in the base of the chassis, where the crepe is presented. Mostly these selected pieces in addition to other pieces that we will choose ac cording to experience and work, in addition to the Arduino Mega piece and the power supply to supply some motors with the necessary electricity and in addition to the driver for the motors that will need
dc.identifier.uri	https://hdl.handle.net/20.500.11888/20401
dc.supervisor	dr. anas toma
dc.title	crepbot