Utilization of Olive Husk as a Replacement of Fine Aggregate in Portland cement Concrete Mixes for Non-Structural Uses

Thumbnail Image
Date
2007
Authors
Iyad Jameel Ahmad Bani Odi
Journal Title
Journal ISSN
Volume Title
Publisher
Abstract
This research aims at partially solving the environmental problem of olive oil wastes (husk & ash) by utilizing this waste in non-structural concrete mixes. On the other hand, this research aims at studying the effects of using olive oil wastes (husk & ash) on the physical properties of Portland cement concrete. To achieve the purpose of this thesis, the following methodology will emphasize and express the physical characteristics of Portland Cement Concrete (PCC) when olive oil waste (Husk) and Burned Husk (Ash) are used in the production of lightweight concrete, the following tests were done: sieve Analysis and specific gravity for coarse aggregate, fine aggregate, olive husk, olive ash. Different percentage replacements of olive husk or ash were used (0, 25, 50, 75, 100) % for concrete grades (PCC150,PCC200, PCC250, PCC300, PCC450), for each grade four samples for each proportion were done to test slump, density and compressive strength. In addition, three samples were prepared for testing absorption, abrasion, noise insulation, and thermal insulation. Results for all percentage replacements of olive husk and ash for all grades were ranging from (23-29) mm for slump. For olive husk and ash (density & compressive strength) are decreased as percentage replacement increases. For water absorption, as percentage replacement by olive husk and olive ash decrease, water absorption increases. For abrasion test, losses in weight due to abrasion increase as a percent replacement of olive husk or ash increases. For noise insulation, sound reduction increases as the percentage replacement of olive husk or ash increases. For thermal insulation, it increases as percent replacement of olive husk increases; however, it decreases as percent replacement of olive ash increases. Key words: Portland cement concrete, olive oil waste, husk, burned husk, ash, utilization, non-structural concrete.
هذا العمل يهدف إلى حل المشاكل البيئية الناجمة عن جفت الزيتون و جفت الزيتون المحروق وذلك عن طريق استخدامها في الخلطات الخرسانية. من ناحية أخرى يهدف هذا البحث إلى دراسة آثار استخدام مخلفات زيت الزيتون على الخواص الفيزيائية للخلطة الخرسانية. من أجل تحقيق هدف هذا البحث، آلية العمل الآتية سوف تأكد وتعبر عن الخواص الفيزيائية للخرسانة عندما يستخدم جفت الزيتون والجفت المحروق في إنتاج الباطون الخفاف، الفحوصات الآتية نفذت: التدرج الحبيبي والوزن النوعي للحصمة، الرمل، جفت الزيتون وكذلك الجفت المحروق. النسب المختلفة المستبدلة من الجفت والجفت المحروق بالرمل كانت (0، 25، 50، 75، 100 )%لدرجة الباطون ( B150، B200، B250، B300، B450 ) ، لكل نوعية خرسانة تم عمل أربعة عينات من المكعبات الخرسانية من أجل عمل فحوصات التهدل، الكثافة وقوة التحمل، هذا بالإضافة إلى ثلاثة عينات من أجل عمل فحوصات الامتصاص، الاهتراء، العزل الصوتي، العزل الحراري . النتائج لجميع النسب المئوية المستبدلة ولجميع درجات الخرسانة كانت (23-29)ملم لاختبار التهدل. بالنسبة للجفت و الجفت المحروق كلما زادت النسب المستبدلة تقل الكثافة و قوة التحمل بالنسبة إلى الجفت امتصاص الماء يقل عندما يتم استبداله بنسب 25%، 50% لكنه يزيد عند استخدام نسبة 75% و يقل عند استخدام نسبة 100% من الجفت. بالنسبة للجفت المحروق كلما زادت النسبة المئوية المستبدلة امتصاص الماء يقل. بالنسبة لفحص الاهتراء ، يزيد الفقدان بالوزن نتيجة الاهتراء كلما زادت النسب المئوية المستبدلة من الجفت و الجفت المحروق، ما عدا أنه يقل عند نسبة 50% من الجفت المحروق . مفتاح الكلمات: الخرسانة الإسمنتية، مخلفات زيت الزيتون، الجفت، الجفت المحروق، استخدام، باطون لأغراض غير إنشائية.
Description
Keywords
Citation