Recent Submissions

  • AD 

    Nimer Hindy (2019)
    Around the world there is a lot of bakeries that making the bread for all people ,but there is no one uses this huge amount of bread to make any another advantages except eating. In this project we want ...
  • Pyrolysis Reactor Design for the Copper Wires Waste 

    • Sohaib Abdelhadi; Islam Myadmeh; Majd Sawafta; • Hussam Suliman (2019)
    The pyrolysis is known as thermal decomposition of hydrocarbons with absence of oxygen the aim of this project is to design pyrolysis furnace to end up pollution resulted due to copper extraction of its plastic cover by ...
  • The Pyrolysis Plastics of Copper wire to Oil 

    Ahamd Abu-Jazar; Osaid Aseda; Osama Atari (2019)
    The world isfacing a huge energy gap due to the unexpected growth in industry around the planet of earth, and it is heading towards alternatives resources which are the renewable energy sources in order to overcome the ...
  • “Optimization Of Insulation Thickness For Building’s External Walls And Ceilings In Palestine (West Bank)” 

    Zaid Almasoud; Muhammad Jaarah; Abd ElmuhsenSalamh; Muhanad Abu Alwafa (2019)
    This study focused on systematic approach for optimization Insulation Thickness For Building’s external wall and ceilings in Palestine. Various methods had been adopted by researchers to calculate the optimum insulation ...
  • Side impact beam 

    Maram, Mohammad; Tami, Qabaha (2019)
    Abstract – This project examines the traumatic shocks experienced by cars during accidents and the fact that the side of the car is one of the most important areas in terms of safety and protection features. Therefore, ...
  • General board for full automatic washing machine 

    Zubeidi, Maen; Khamalan, Amr; sawaftah, Mostafah; Qut, Anas (2018)
    Washing machines as home appliances are built nowadays around specific microcontrollers and these controllers have special program, if anything changed or fails in the machine the microcontroller will stop responding, hence ...
  • The Technical and economic impact of solar system (500kw) on Network (Anabta as a case study ) 

    Salameh, Tahseen; Nassar, Mohammad (2018)
    Using ETAP, Medium Voltage case study of Anabta electrical distribution network was simulated and analyzed. We used PV system program in graduation project (1) to design 500 KWp grid tied PV systems .Then, the capacity of ...
  • WEEDING ROBOT 

    Al-Nahwi, Haneen; Kayed, Alaa; Zakaria, Qamar (2018)
    In this project, a robot will be designed, fabricated and tested capable of removing weed effectively from a farmland, saving irrigation water and minerals to the grown trees. Moreover, it has a feature of collision avoidance ...
  • Vector control of IM 

    Mohsen, Waed; Bolus, Maha; Hasan, Abeer (2018)
    The 3-phase alternating current (AC) induction motors, which is the most widely used motor type in the industry has been favored because of its good self-starting capability, simple and rugged structure, low cost and ...
  • SVC Based Flexible AC Transmission System (FACTS) 

    JadAllah, Hiba; Hamdan, Thanaa (2018)
    The project is designed to enhance the power factor of transmission line with the help of SVC i.e. static variable compensator. SVC uses TSC (Thyristor Switched Capacitors) based on shunt compensation that is controlled ...
  • Developing Entrepreneurship indices for universities 

    Sabbah, Amna; Mousa, Hadeel; Berawi, Fatima (2018-12-13)
    1.1 Abstract An-Najah national University seeks to develop and produce qualified human resources through the provision of high quality educational benefits. To ensure that this goal has been maintained over the years, the ...
  • Implementation of Lean Manufacturing Tools At Al-Maslamani Factory: Inventory waste reduction 

    Adas, Ansam; Hakawati, Raghad; Thuluth, Batoul; Al Omar, Saly; Al-Abed, Fareda; Takrori, Lara (2018-12-13)
    Al-Maslamani Brothers Company was established in 1952 by Mr. Saeed Muslamani is considered as one of the biggest trading companies in Palestine working in the field of roasting, manufacturing and packaging of different ...
  • The reality of quality cost in Palestinian food industrial companies in west bank 

    Sharif, Yara; Ayman, Rimonda; Sharif, Ghena; Salman, Israa; Samaro, Anhar (2018-12-13)
    The Cost of quality is defined as the cost that is connected with the non-achievement of product or service quality as defined by the requirements recognized by the organization and its agreements with customers. The goal ...
  • Supply and demand analysis at Palestine poultry company (AZIZA) 

    Shahrori, Ahmad; Ghazi, Bilal; Dawabsheh, Osama; Abbas, Waleed (2018-12-13)
    AZIZA Companyis considered as one of the largest companies that supplied the Palestinian market with poultry products.It has many facilities distributed in different locations in the West Bank and the mangers in the company ...
  • Civic Center (Boulevard): For Metropolitan Ramallah, Albireh and Beituniya 

    قواسمة, تالا (2018-05-20)
    الى اي مدى سوف يتحمل المركز التجاري الحالي في منطقة المتروبوليتان (رام الله, البيرة, بيتونيا) التوسع ؟ و هل هناك بديل ؟ الجواب هو ليس لمدى طويل, بالواقع قد وصل الى اعلى مستويات التوسع و حان الوقت لايجاد بديل لهذا المركز ...
  • Re-study the Hierarchy of Services Centers in Salfit Governorate 

    Ayyash, Mohammed (2018-05-20)
    يهدف البحث الى تقديم صورة واضحة عن مفهوم هرمية مراكز الخدمات ودراسة أنماط مراكز الخدمات بشكل خاص محافظة سلفيت , وبشكل رئيسي إعادة دراسة قامت بها وزارة التخطيط الفلسطينية سابقا في عام 2006 . تعد محافظة سلفيت الثانية بعد ...
  • FISHING PORT DESIGN 

    ABDEL ALRAHMAN, WALEED (2018)
    The role of the fishing port may be considered as the interface between the netting of fish and its consumption. In many cases, the fishing harbour is also the focal point of pollution, both of the surrounding environment and ...
  • Forum prisoners liberated 

    Dwaikat, Wala'a (2018)
    Due to the circumstances in which we live in Palestine in the circumstances of the occupation and the current security situation, after examining the situation and the psychological conditions of the prisoners, and because ...
  • Structural Analysis educational-cultural building in Nablus city 

    Tala Dwaikat; Sabrin Suwan; Heba Sameer (2018)
    This project outlines the structural analysis of stories reinforced concrete Educational-cultural building following ACI code. This report covers the full analysis of the structure including slabs, beams, columns, shear ...
  • Analysis and Design of UMT Building 

    Qais Tanbour; Nabeel Bishtawy; Sabri Hasan; nedal aqel (2018)
    A mathematical model for analysis and design of UMT Exhibition in Nablus is developed, using the finite element package(software) SAP2000, ETABS and SAFE. Shell, bracing, beam and column elements were used to simulate the ...

View more