Now showing items 21-40 of 2906

    • Preliminary Design of Low Speed Wind Tunnel 

      Maher Na'eem Abu-Khadra; Fawzi Sadiq Abufarha (2020)
      This work demonstrates design procedure for low speed wind tunnel. Test section is the starting point for designing close loop wind tunnel, designing the other components depend on it. Such as settling chamber, two-dimension ...
    • Bulletproof design 

      Haitham Al-Bzoor; Saeed Turkman; Mahdi Majjad (2020)
      Armor are of great importance in protecting the fighters from the serious injuries and with the development of weapons and their diversity, there is a need to develop and manufacture armor capable of repelling and mitigating ...
    • ROTATE ALUMINUM MELTING FURNACE 

      ORWA ABBAS; AHMAD ABUSALAMA; ABDUL-RAHMAN MOHAMMAD; ANAS AL-BANA; YAHYA ALI (2020)
      The aim of this project is to construct aluminum melting furnace, the temperature will heat up to 088 ° C inside the furnace. The furnace is designed and manufactured with the best types of insulation (bricks and thermal ...
    • Redesign of Nablus Municipality Biulding 

      Fatayer, Farah; Raed Johary, Lina; matar, Duaa (2020)
      The re-design project is about making improvements on the proposed plans. In order to reach the most efficient performance for the building from all aspects, architectural, environmental, mechanical, structural and ...
    • secondary school project 

      shkarnah, Hani (2020)
      Due to the importance of education in the world in general and in Palestine especially because of the growing population the title of graduation project is secondary school project. The aims of the project are to evaluate ...
    • Integrated redesign of a faculty of architecture in Nablus city 

      Akhras, Marwan; Seddeh, Musab; Sabbah, Jameel (2020)
      An-Najah University is one of the largest universities in Palestine, it contains many faculties, and one of these faculties is the faculty of engineering. Ten percent of its students are in the faculty of architecture ...
    • Automated Hydroponics 

      Sharaqah, Braah; Zaid, Eman (2019)
      Hydroponics is a modern method in Aquaculture without the use of soil. It based on the water and nutrient solution. Aquaculture has many benefits, such as, including doubling traditional production , better utilization of ...
    • Smart Grid Electricity 

      Sharaqah, Barah; Khalifa, Marwa; Sadaqa, Nagham (2019)
      Smart electricity grid is JAVA and WEB system developed to help the workers in the North Electricity Distribution Company solving the problem of frequent disconnection in electricity. This system enables the workers to ...
    • Automatic Car Parking System 

      Ibsias, Medhat; Al-Haji, Ameer (2019)
      Computer engineering attends to solve problems in all aspects of life, this project will solve the problem of cars parking, also solving the problem of unused path to parking slots inside the parking. The automatic ...
    • Physiotherapy and Beauty Center 

      AWAD, EZAR (2019)
      project name : Physiotherapy and Beauty Center Project Idea : The idea of the project is based on the design of wide open and unopened spaces where the project was established on a large land area of 24 acres to provide ...
    • Estimating Heating and Cooling Loads Software 

      Ahmad Ismail (2020)
      The heating and cooling loads estimation plays a vital role in hardware sizing estimation and cost estimation to purchase , or to run and to estimate marginal profits when it comes to business goals. Because now a day’s ...
    • Estimating Heating and Cooling Loads Software 

      Ahmad Ismail; Laith Husain; AdhamHarazneh (2020)
      The heating and cooling loads estimation plays a vital role in hardware sizing estimation and cost estimation to purchase , or to run and to estimate marginal profits when it comes to business goals. Because now a day’s ...
    • Wire Winding Machine of Electric Motors 

      Islam Musllam; Ashraf Baker; Yosif Yameen (2020)
      A manual winding machine usually has a core on a spindle and the user feeds wire, rope, or other material onto the core. The user controls the spindle speed and feeds the material through user hand, guiding it to control ...
    • WASTEWATER TREATMENT USING ADVANCED OXIDATION PROCESS COMPINED WITH MAGNETIC MECHANISM DESIGN” 

      ABDELKAREEM. ARMAN; EMAD.AL-DEEN SALAHAT; YAZAN. HAJ TAHER (2020)
      One of the most imperative issue that must be considered in order to protect our environment is water pollutants which are relative to domestic and industrial effluents represented by chemical waste, sewerage waste…etc. ...
    • Nablus General Hospital 

      ZAGHA, WAFA (2019)
      General hospital in Nablus design to be a regional hospital with a large number of specialized facilities designed with the latest technologies. Human, functional, aesthetic, green, safety aspects were took into ...
    • “Design of Automatic Stirrup Bending Machine (ASBM)” 

      Mohammed Marwan; Ahmad Arda; Omair Bani oudeh (2020)
      We have a several problem we face it in Palestine market one of the existed problem we have no availability of an automatic stirrup bending machine for construction column , that means that it is existed but with high cost ...
    • Board Solver 

      Sayeh, Ameed; Kiwan, Raslan (2019)
      Making our lives easier is one of the main objectives of technology, always aiming to make new things in that purpose, and surely, the robotic age has its fair share in doing that, making alternatives that could take the ...
    • Delta Shopping 

      Kiwan, Raslan (2019)
      This project is a web and mobile application for online shopping and hotel reservation. Users are able buy stuff that other people offer through the application. In addition, they can reserve a room in a hotel in a country ...
    • Safe Driving 

      Abu-Hijleh, Nour; Mahamdeh, Raya (2019)
      Drowsy driving is considered a major problem. The danger, and often tragic results of drowsy driving are alarming. Drowsy driving happens when a driver has not slept enough, but it can also happen due to other reasons ...
    • The Processing of Arabic Financial Reports 

      nour, Abu-Hijleh; Mahamdeh, Raya (2019)
      The economical sector is huge sector, that requires the availability of a full database, rather than wasting time and effort in collecting the financial reports from companies, and extracting the required data manually, which ...