Design of a Wastewater and a Stormwater Collection Networks for Illar Using SewerCAD and StormCAD

No Thumbnail Available
Date
2014
Authors
Mohammad Ghassan Taqatqa
Yousef Zeyad Zahran
Journal Title
Journal ISSN
Volume Title
Publisher
Abstract
As known water is considered one of the natural lives needs because no one can live without it and cannot do his daily works without water. Water supply networks are being used in order to move the water to demand area. When water is being used then the wastewater will be generated. The traditional method for the disposal of wastewater is by using cesspits. This method has many problems such as the pollution of the groundwater, caused cracks in the nearest foundations, and the wastewater cause disease spread and hygienic problem. Because of these problems the conduits networks must be constructed and from our view we make our design to share solution. This current situation in Illar, thus this requires to construct a sewage collection network. Construction of the network needs design and this is our rule in the project.    Storm water is the water that originates during precipitation events. It may also apply to water that      originates with rain fall that enters the storm water system. Storm water that does not infiltrate into the soil becomes surface runoff, which either flows directly into surface waterways or is channeled into storm sewers, which eventually discharge to surface waters. When the rain falls on the surface in huge quantity, it can damage crops, houses and infrastructure, so we will design a storm water collection system to avoid previous problems if the design is implemented. Our design area is large and has large population and does not contain the sewer net works and storm water net works, this was chosen to design by SewerCAD to design wastewater system, and use StormCAD to design Storm water net work.    1.2 Objectives   The main objectives of this project are: 1-     To design a wastewater collection network for Illar Village using SewarCAD. 2-     To design a stormwater collection network for Illar Village using StormCAD.     1.3 Methodology 1)  Selection of study area   We chose Illar area to design our project because:      a)     It does not have wastewater and stormwater collection network b)     The data needed is available c)      Fund is available to construct these network d)     We know very well  the study area since we both reside in  
Description
Keywords
Citation