Now showing items 1-20 of 226

    • General board for full automatic washing machine 

      Zubeidi, Maen; Khamalan, Amr; sawaftah, Mostafah; Qut, Anas (2018)
      Washing machines as home appliances are built nowadays around specific microcontrollers and these controllers have special program, if anything changed or fails in the machine the microcontroller will stop responding, hence ...
    • The Technical and economic impact of solar system (500kw) on Network (Anabta as a case study ) 

      Salameh, Tahseen; Nassar, Mohammad (2018)
      Using ETAP, Medium Voltage case study of Anabta electrical distribution network was simulated and analyzed. We used PV system program in graduation project (1) to design 500 KWp grid tied PV systems .Then, the capacity of ...
    • WEEDING ROBOT 

      Al-Nahwi, Haneen; Kayed, Alaa; Zakaria, Qamar (2018)
      In this project, a robot will be designed, fabricated and tested capable of removing weed effectively from a farmland, saving irrigation water and minerals to the grown trees. Moreover, it has a feature of collision avoidance ...
    • Vector control of IM 

      Mohsen, Waed; Bolus, Maha; Hasan, Abeer (2018)
      The 3-phase alternating current (AC) induction motors, which is the most widely used motor type in the industry has been favored because of its good self-starting capability, simple and rugged structure, low cost and ...
    • SVC Based Flexible AC Transmission System (FACTS) 

      JadAllah, Hiba; Hamdan, Thanaa (2018)
      The project is designed to enhance the power factor of transmission line with the help of SVC i.e. static variable compensator. SVC uses TSC (Thyristor Switched Capacitors) based on shunt compensation that is controlled ...
    • Standalone Inverter 

      Harb, Mohammad; Abu Madi, Malek; Abu Madi, Naser (2017)
      Inverters are often needed at places where it is not possible to get AC supply from the Mains. An inverter circuit is used to convert the DC power to AC power. For high power applications, thyristors are often used. However, ...
    • OPTIMAL DESIGN, SIMULATION AND TESTING OF GRID CONNECTED PV POWER SYSTEMS FOR SELECTED DAILY ENERGY LOADS 

      Sonono, Islam; Al Mashni, May; Hanani, Ghazal (2017)
      The aim of this project is determining of optimal design for grid connected PV power system in the range of daily loads amounting to 20 Kwp and designing a 30% of total demand forEngineering and Information technology ...
    • Rehabilitation of jenin Electrical Network 

      hamad, Afrah; khaseb, Mohammad; atatrah, Naser (2018)
      This project is to make a load flow study and analysis for jenin Electrical Network using ETAP software to improve the power factor and to reduce the electrical losses in the network and so reducing the penalties in the ...
    • Active power factor correction using boost converter 

      jehad, Omar; AbuMassoud, Adnan; radwan, Ala'a (2018)
      In the present situation, the evolution of growing in computers, laptops, uninterrupted power supplies, telecom and biomedical equipment has become overpowering. Hence, the utilization of such equipment results high power ...
    • 33KWp PV System 

      saleh, Anas; ibraheem, Karam; alawneh, Yousef; mare, Osaid (2018)
      In project 1 there is a studyin details of the 33(kwp)PV system which is installed in Alrrajeh factory. First ofall this project starts with the important of PV system in Palestine, the equipment are installed , best angle ...
    • Rehabilitation of jenin Electrical Network 

      hamad, Afrah; khaseb, Mohammad; atatrah, Naser (2018)
      This project is to make a load flow study and analysis for jenin Electrical Network using ETAP software to improve the power factor and to reduce the electrical losses in the network and so reducing the penalties in the ...
    • solar electrical car 

      Balbese, Rami; Yaseen, Islam; al Masri, Ameen (2018)
      We knew the necessity of transportation in life and its impact on natural life as a source of harmful gases and the importance of clean energy and its use in transportation. In this project, we will complete how to use ...
    • Designing a Power Station Based on CSP Technology in Nablus Governorate 

      hannoon, Sahar (2018)
      Solar energy is a key sustainable energy source and the most bounteous energy source on the earth and considered as an important alternative to fossil fuels. Sun oriented vitality can be changed over into electric energy ...
    • Emergency Smart Traffic Management based on WIFI Technology 

      Lahloh, Batool; Nassar, Samah (2018)
      As the number of vehicle grows rapidly, traffic congestion problem increase as well.Because of this, emergency vehicles are delayed to reach the destination. Due to the above mentionable problem, control and management ...
    • Designing a Power Station Based on CSP Technology in Nablus Governorate 

      Hannoon, Sahar; Yasin, Aysar (2018)
      Solar energy is a key sustainable energy source and the most bounteous energy source on the earth and considered as an important alternative to fossil fuels. Sun oriented vitality can be changed over into electric energy ...
    • Emergency Smart Traffic Management based on WIFI Technology 

      Lahloh, Batool; Nassar, Samah (2018)
      As the number of vehicle grows rapidly, traffic congestion problem increase as well.Because of this, emergency vehicles are delayed to reach the destination. Due to the above mentionable problem, control and management ...
    • Smart Spot Welding Machine 

      Nawasrha, Moath; Hawi, Oday (2018)
      Resistance spot welding is widely used in the fabrication of vehicle bodies and parts of their equipment. The article presents the methodology and the results of non-destructive ultrasonic testing of resistance spot welded ...
    • Protection and Simulation of 3ph induction motor in Matlab with Direct and Soft starting methods 

      Hamad, Mohanad; Jadallah, Majdy; Radwan, Oday (2018)
      Asynchronous machines are considered nowadays the most commonly used electrical machines, which are mainly used as electrical induction motors. Starting the induction motor is the most important and dangerous step. The ...
    • Smart Water Pump Speed Controller 

      Asmar, Mohammad; Aqhash, Ossaid; Nabulsi, Ehab (2018)
      Smart water pump speed controller project is a solution for low-pressure water network. In most of low-height buildings, the head of the water is not enough to produce a good pressure in the network, so the easiest solution ...
    • Underground cables fault detector 

      Hamdan, Ahmad; Edele, Ahmad (2018)
      A major problem faces underground electrical power distribution networks is the presence of fault prior to the energizing phase of any project. The fault could be either an open circuit, or short circuit caused by accidental ...